Hardware

Hardware

DOOR HARDWARE
Table 1
1) THE CASTELLAN SURFACE LATCH
The Castellan Surface Latch has surface-mount hardware with the look of mortise in polished brass. Reversible levers for left and right hinged doors make installation on your storm door easy. Matching interior and exterior finishes eliminates the need to match paint colors.

Fits doors 3/4 in. to 1-1/4 in. thick
Includes built in thumb turn deadbolt
5-1/2 in. mounting hole spacing
All mounting hardware included

Available colors: black and satin nickel.
2) TIE DOWN PUSH BUTTON LATCH
For out swinging wood or metal doors 3/4" - 1-1/4" thick 1-3/4" mounting hole spacing Installs in three 5/16" holes "No Lock Out" feature prevents accidental lock out. Contains two sizes of strike plates and shims to provide adjustment for varying backsets. All installation hardware included.

Available in black only.
3) INSVING STORM DOOR LATCH
For in-swinging wood or metal doors 5/8" - 1-3/8" thick 1-3/4" installation hole spacing Installs in three 5/16" diameter holes 7/8" backset.

Available in black and white.
4) TAP-N-GO DESIGNER STANDARD DUTY PNEUMATIC DOOR CLOSER
  • For out-swinging wood or metal doors
  • Full 90-degree opening
  • Push button hold open feature
  • Tool-free adjusting screw to adjust the closing speed
  • Factory lubricated
  • All installation hardware included
  • Available in black and white
5) TRU-CLOSE NARROW SPRING HINGE
Patented adjustable self-closing mechanism ensures your gate closes first time, every time Ultra-strong polymers and stainless steel components - will never rust, bind or stain Self-lubricating and UV-stabilized.

Available only in black.
6) DOOR SWEEPS (BRUSH SEALS)
Consist of densely compressed nylon filaments encased in high quality aluminum retainers.

The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force.

Brush remains flexible down to -40°F and has a melting point above 400°F.

Ideally suited for hollow metal and wood door applications.

Door bottom sweeps are most commonly used on the exterior of outswing doors.

Available in white and bronze.
SCREENING TOOLS AND EQUIPMENT
7) 1/16 Single Round Edge Nylon Wheel Screen Roller
Roller Diameter: 2-1/2" (63.5 mm)
Roller Thickness: 1/16" (1.6 mm)
Ship Via: Can Ship UPS
Shipping Weight: 6 oz (181g)
8) 3/32" Single Concave Edge Nylon Wheel Spline Roller
Roller Thickness: 3/32" (2.4 mm)
Roller Diameter: 2" (50.8 mm)
Ship Via: Can Ship UPS
Shipping Weight: 6 oz (181g)
9) 1/8" Single Concave Edge Nylon Wheel Spline Roller
Roller Thickness: 1/8" (3.2 mm)
Roller Diameter: 2" (50.8 mm)
Ship Via: Can Ship UPS
Shipping Weight: 6 oz (181g)
10) 3/16" Single Concave Edge Nylon Wheel Spline Roller
Roller Thickness: 3/16" (4.8 mm)
Roller Diameter: 2" (50.8 mm)
Ship Via: Can Ship UPS
Shipping Weight: 6 oz (181g)
11) Heavy-Duty Combination Nylon Wheel Screen and Spline Roller
Roller Thickness: 2" x 3/32" and 2" x 1/16"
Roller Diameter: 2" (50.8 mm) and 2 1/2” (63.5 mm)
Ship Via: Can Ship UPS
Shipping Weight: 6 oz (181g)
SCREEN SPLINE
12) .140 Polyfoam Spline
Comes in 500’ and 3000’ rolls
SCREEN WALL: Use our .140 Poly Spline with Screen Wall System Master Frame and Divider Extrusions - ALL screen materials. SNAPP: Use our .140 Poly Spline with Snapp Screen System ONLY when installing 16x14 .025g PVC Coated Polyester, 18x20 .025g PVC Coated Polyester, or any other high gauge material. (MADE IN USA)
13) .170 Polyfoam Spline
Comes in 500’ and 2700’ rolls
SNAPP: Use our .170 Poly Sline with Snapp® Screen System when installing all screen materials EXCEPT 16x14 .025g PVC Coated Polyester, 18x20 .025g PVC Coated Polyester, or other high gauge material. (MADE IN USA)
14) .200 Polyfoam Spline
Comes in 500’ and 1500’ rolls
.200 Use with Simplicity® Screens - all styles and types of screen and PVC materials.
HARDWARE
15) Step Drill for Spring Plunger Bolts
For Quick Installation of Spring Plunger Latches.

The two step high speed steel drill bit has a 7/32-inch shank which "steps" down to an 1/8 inch. This handy drill allows you to drill both sizes of holes needed for the installation of plunger latches in a single operation.
16) Plunger Latch (100 PCS)
A Spring Plunger Bolt is designed to hold screens in window frames. The spring loaded Die Cast Metal plunger pops into a hole drilled into the screen frame with our Step Drill.
17) Delux frame Leaf Spring (100 PCS)
Flat Leaf Springs help keep screens held tightly in window channel. To install you can drill two 3/16 inch holes or simply use our Screen Frame Punch Tool in 5/16 or 3/8 roll formed frame. You can also drill two 3/16 holes 3 3/16 apart on 7/16 or other sizes of window screen frame.
18) Bail Loop Latch (100 PAIRS)
Bail Loop Latches are used to hold bottom of screen snug into the window frame. The ball head screw is inserted in the inner side of sill. 
19) Jiffy Hangers and Nails (100 PAIRS)
Used to support upper part of screen frame, the Jiffy Hanger swivels out from the window frame to permit easy installation or removal of screen. One pair of hangers is needed for each screen.

Fits Aluminum Screen Frame up to 7/16" Thick.
20) Aluminum Riv-Nuts (100 PCS)
8-32 Aluminum Riv-Nuts (100 PCS) - Creates a threaded receiver for thumb screws (or screws). Easy installation with either of our stock Riv-Nut pullers. Install into Connecticut Screen Works® Screen Wall System® Master Frame or Divider Extrusion when using inserts.
21) Thumb Screw & Retainer Clip (200 PCS)
8-32 Thumb Screws and Retainer clips. (200 PCS - 100 Screws / 100 Clips) For use with our stock aluminum Riv-Nuts to retain insert panels on the Connecticut Screen Works® Screen Wall System®.
22) Lift Tabs
Lift Tabs are used to help ease installation and removal of the window screens. With them you can more easily lift screens out of window channels.
23) Roll Formed Aluminum Spreader Bar Clips for 5/16” frames
Roll Formed Aluminum Spreader Bar Clips.
24) Simplicity Screens 7/16" Plastic Twist Lock (100 PCS)
Plastic Wing Clips will not rust and are corrosion resistant. The clips are attached to the window frame with a Pan Head Phillips Sheet Metal Screw for wood, or a Pan Head Phillips Machine Screw for metal frames. These Clips will accommodate both screens and storm window panels.
25) Zinc Flush Diecast Window Screen Clip
Diecast Wing Clips secure screens or storm panels to wood or metal frames. They are simple to mount, and turn for easy removal of panels. Made of Zamac alloy metal that will not rust or corrode. Clips are available in bulk packages of 50 pieces.
26) Zinc 5/16" Diecast Window Screen Clip
Diecast Wing Clips secure screens or storm panels to wood or metal frames. They are simple to mount, and turn for easy removal of panels. Made of Zamac alloy metal that will not rust or corrode. Clips are available in bulk packages of 50 pieces.
27) Zinc 7/16" Diecast Window Screen Clip
Diecast Wing Clips secure screens or storm panels to wood or metal frames. They are simple to mount, and turn for easy removal of panels. Made of Zamac alloy metal that will not rust or corrode. Clips are available in bulk packages of 50 pieces.
28) Screen Wall System Divider Extrusion Installation Screw
Divider Extrusion installation screw. 410 Stainless w/t thread lock pre-applied. 100 PCS
29) Screen Wall System Master Frame Assembly Screw
Master Frame assembly screw. 410 Stainless w/t thread lock pre-applied. 100 PCS.
30) Screen Wall System R Channel Attaching Screw
R Channel attaching screw. 410 Stainless w/t thread lock pre-applied. 100 PCS
31) Snapp® Screen System - Stainless Steel Installation Screws 
Snapp® Installation Screw: 18-8 Stainless Steel. #6 X 3/4 Square Drive Truss Head (100 PCS)
SCREEN WALL RELATED PRODUCTS
Screen Wall System Master Frame Extrusion 16’
White - $111.50
Bronze - $117.78
Mill - $60.58
Screen Wall System Divider Extrusion
White - $118.37
Bronze - $150.68
Mill - $66.31
Screen Wall System Standard Corner Insert
$9.92
Screen Wall System Swivel Corner Insert
80° to 180° - $38.50
80° to 180° - $38.50
Screen Wall System R Channel Extrusion
White - $54.97
Bronze - $54.97
Mill - $23.22
Screen Wall System Angle Extrusion
White - $49.02
Bronze - $48.82
Mill - $15.46
Screen Wall System Stop Extrusion
White - $61.20
Bronze - $61.82
Mill - $25.91
.140 Polyfoam 
Spline
500’ roll - $18.95
3000’ roll - $66.46
Screen Wall System Master Frame Assembly Screw (100 PCS)
White - $20.00
Bronze - $20.00
Mill - $20.00
Screen Wall System Divider Extrusion Installation Screw (100 PCS)
White - $35.00
Bronze - $35.00
Mill - $33.00
Screen Wall System 
R Channel 
Attaching Screw
Mill - $22.00
Thumb Screw & Retainer Clip (kit includes 100 clips and 100 thumb nails)
White Painted - $50.00
Bronze Painted - $70.00
Mill - $50.00
Share by: